此页面上的某些内容不提供英文版本,默认显示为当前可用的语言。
NHS Ester Labeling of Biomolecules Containing Primary Amino Groups
NHS (N-HydroxySuccinimide) esters and other activated esters (sulfo-NHS, sulfotetrafluorophenyl — STP) are
reactive compounds suitable for the modification of amino groups. NHS is the most common type of activated
esters.
Usual modifications are fluorescent labels, fluorescence quenchers, and other reporter groups. Alkyne
and azido groups can be attached using activated esters to adapt biomolecules to click chemistry.
Especially common are modifications of proteins and peptides since they nearly always contain amino groups. Other examples are modifications of amino-oligonucleotides, amino-modified DNA, and amino-containing sugars.
The reaction of NHS esters with amino groups is strongly pH-dependent: at low pH, the amino group is protonated, and the modification does not occur. At higher-than-optimal pH, hydrolysis of NHS ester is quick, and the yield of modified molecule decreases. The optimal pH value for modification is 8.3-8.5.
Water is the most common solvent used to dissolve NHS esters for biomolecule labeling. If NHS ester is poorly soluble in aqueous solutions, it can be at first dissolved in dimethyl sulfoxide (DMSO) or dimethylformamide (DMF) and then added to a solution of protein in a buffer with pH 8.3-8.5. Note that DMF can degrade into dimethylamine, which has a fishy smell and is able to react with activated esters. Therefore, to label biomolecules, it is important to use high-quality DMF that contains no dimethylamine and has no fishy odor.
We recommend using the
following general protocol for the labeling of biomolecules with NHS esters produced by Lumiprobe:
- Calculate the required amount of NHS ester using the formula below or our protein labeling calculator:
NHS_ester_weight [mg] = 8 × amino_compound_weight [mg] × NHS_ester_molar_weight [Da] /
amino_compound_molar_weight [Da].
8 is a molar excess of NHS ester. It is an empirical value for mono-labeling, suitable for many common proteins and peptides. However, in some cases using less or more NHS ester can increase the yield of the modified biomolecule. It depends on protein structure, reagent used for labeling, and its solubility. The molar weight of Lumiprobe products can be found on the corresponding product pages.
For example, to label 3 mg of BSA (molar weight 66500 Dalton) with Cy5 NHS ester
(molar weight 616 Dalton), and obtain maximum yield of mono-labeled product, one should use 8
× 3 mg × 616 Da / 66500 Da = 0.22 mg of Cy5 dye NHS ester.
- Calculate the volume of the reaction mixture. The optimal biomolecule concentration in labeling reaction is 1-10 mg per mL. The labeling can be performed on any scale, from nanomols to dozens of grams. If you label a low amount of biomolecule, keep the volume of the reaction mixture at a minimum (10-20 uL).
- Dissolve NHS ester in 1/10 reaction volume of water, DMF, or DMSO. Dimethylamine-free DMF or water are preferred solvents. NHS ester dissolved in DMF can be stored in solution for 1-2 months at −20ºC. The aqueous solution of NHS ester should be used immediately after preparation.
- Dissolve biomolecule in 9/10 reaction volume of buffer with pH 8.3-8.5.
0.1 M Sodium bicarbonate solution has appropriate pH. Another alternative is 0.1 M phosphate buffer. Note that pH is the most important factor for successfully labeling biomolecule with NHS ester. Avoid buffers containing amines (Tris-based buffers can sometimes be used but are not recommended. Tris contains amino group, but its affinity to activated esters is low).
When doing large-scale labeling (using hundreds of milligrams of NHS ester), note that the mixture tends to acidify with time because of the hydrolysis of NHS ester. Monitor pH, or use a more concentrated buffer then.
- Add NHS ester solution to the solution of biomolecule, and vortex well. Keep on ice overnight,
or at room temperature from 1 to 4 hours.
- Purify the conjugate using the appropriate method: gel-filtration for macromolecules is the most common. Chromatography is another alternative. For proteins and nucleic acids, ethanol or acetone precipitation can be used. Organic impurities (such as N-hydroxysuccinimide, NHS ester, and acid produced by hydrolysis) are almost always easily separated by these methods.
相关产品
具有胺反应性琥珀酰亚胺酯和巯基反应性的马来酰亚胺基团的双功能交联剂。
Found better price?
Let us know
and we will propose the way forward!
绿色荧光染料 AF 488 的四氟苯酯,用于标记蛋白质、多肽和修饰寡核苷酸中的氨基。
Found better price?
Let us know
and we will propose the way forward!
N-Succinimidyl 4-AzidotetrafluBenzate (ATFB SE, ATFB-OSu) 是一种光激活连接剂,是用于研究生物受体的通用标记试剂。
Found better price?
Let us know
and we will propose the way forward!
水溶性 ATT 550 琥珀酰亚胺酯,用于标记水相中的各种含胺分子。
Found better price?
Let us know
and we will propose the way forward!
BDP R6G 是一种硼二吡咯亚甲基染料,其吸收光谱和发射光谱与 R6G 相似。
Found better price?
Let us know
and we will propose the way forward!
偶氮二苯并环辛炔 (DBCO、ADIBO) 试剂用于应变促进的无铜点击化学 (SPAAC)。该试剂含有 NHS 酯官能团,用于将环辛炔连接到各种分子上。
Found better price?
Let us know
and we will propose the way forward!
一种活化酯用于蛋白质/抗体/肽的修饰,引入到无铜点击化学反应。
Found better price?
Let us know
and we will propose the way forward!
具有 DOTA 螯合和胺反应性 NHS 酯基的双功能连接体,用于生物偶联。
Found better price?
Let us know
and we will propose the way forward!
是具有 DOTA 螯合和胺反应活性的 含NHS 酯基的双功能连接体,用于生物分子偶合。
Found better price?
Let us know
and we will propose the way forward!
DusQ 2 暗淬灭剂,淬灭范围为 560 - 670 nm,具有伯胺反应活性,用于合成 FRET 探针。这种 NHS 酯可以与各种带有氨基的分子偶联。
Found better price?
Let us know
and we will propose the way forward!
BCN-PNP 碳酸酯是一种通过氨基甲酸酯与底物伯氨基连接引入 BCN 基团的工具。
Found better price?
Let us know
and we will propose the way forward!
TAMRA 染料的 NHS-酯,通过与氨基反应标记蛋白质、多肽和修饰寡核苷酸。纯6-异构体。
Found better price?
Let us know
and we will propose the way forward!
一种异双功能接头,PEG4 (四乙二醇)侧翼有反式环辛烯和 NHS 酯基团,用于标记抗体、蛋白质和其他含伯胺的生物分子。
Found better price?
Let us know
and we will propose the way forward!
TR(又名德克萨斯红)是一种基于磺基罗丹明骨架的红色荧光染料,是一种胺反应性的NHS 酯。
Found better price?
Let us know
and we will propose the way forward!
一个短的 5 原子(7.7 埃)间隔基的两端分别带有两个 NHS 酯基同效双功能交联剂。
Found better price?
Let us know
and we will propose the way forward!
活化的NHS 酯用于多肽和蛋白质的叠氮基标记。
Found better price?
Let us know
and we will propose the way forward!
己酸 NHS 酯,用于铜催化点击化学中带有炔基的生物分子标记。
Found better price?
Let us know
and we will propose the way forward!
一种活化酯,用于将炔基引入肽/蛋白质和链接反应。
Found better price?
Let us know
and we will propose the way forward!
生物素衍生物,长的间隔基可减少空间效应,可通过与伯胺反应与氨基酸、肽或蛋白质结合。
Found better price?
Let us know
and we will propose the way forward!
水溶性磺基-Cyanine5 琥珀酰亚胺酯,用于在水相中标记各种含胺分子。
Found better price?
Let us know
and we will propose the way forward!
商品数量不正确.